Toshiba FT-6604 Owners Manual - Page 19
Specifications, Otroubleshooting, Guide
View all Toshiba FT-6604 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
© SPECIFICATIONS HANDSET Power Source Battery Life Dimensions (H/W/D) Weight Customer Replaceable Ni-Cd Battery 270mAH 3.6V DC 7 days at Standby Mode, after proper initial charging cycle Approx. 8" x 2-5/16" x 2-1/16" (203 x 59 x 52mm) Antenna Length 4-3/8" (112mm) Approx. 7.4 oz (210g) BASE UNIT Power Source Dimensions (H/W/D) Weight AC 120V 60 Hz/DC 9V Approx. 1-11/16" x 4-1/4" x 8-1/16" (43 x 108 x 205mm) Approx. 9.2 oz (260g) CHARGER Power Source Dimensions (H/W/D) Weight AC 120V 60 Hz/DC 9V Approx. 1-3/8" x 3-1/2" x 3-15/16" (34 x 80 x 100mm) Approx. 2.3 oz (65g) SUPPLIED ACCESSORIES Rechargeable Battery AC Adaptor (2) TRB-6500 Part #. RC003029 (2) TAC-6500 (Part #. RC002201) for FT-6604 or TAC-6500BK (Part #. RC002648) for FT-6604BK Telephone Cord (1) Part #. RC001861 Owner's Manual (1) Speed Dial Index (2) Part #. RC003560 Wall Mount Screw (4) Part #. RC000936 Wall Mount Adaptor (1) WMA-3000 (Part #. RC003561) for FT-6604 or WMA-3000BK (Part #. RC003562) for FT-6604BK Charger Wall Mount Adaptor (1) WMA-3400 (Part #. RC003739) for FT-6604 or For purchase of accessories, please call 1-800-631-3811. WMA-3400BK (Part #. RC003740) for FT-6604BK OTROUBLESHOOTING GUIDE Should any problem occur with the set, make the following simple tests to determine whether or not servicing is required. If the problem persists after you have made these tests, call 1-800-631-3811 for Customer Service. Problem Cause No dial tone 1. AC adaptor of the base unit not plugged into 120 volt AC outlet. 2 Battery is low in power - place the handset in the base unit or charger and recharge. a Telephone line cord detached - check wall jack. 4. TALK button in standby - switch to talk position. 5. Telephone line trouble - check line with a conventional phone. 6. The Digital Security Code is lost - place the handsets on the base unit to set the Digital Security Code again. No calls coming in 1. All of the above except 4. 2 TALK button is in the talk position - switch to standby position. Static noise on conversation 1. Approaching maximum range of the base unit - make sure that the base antenna is fully extended. 2 Outside range of the base unit. 3 Battery is low - place the handset in the base unit or charger and charge. 4. Base located in an area with high interference - relocate the base unit. 5. General interference from TV, appliances, etc. - move away from interference source. Battery goes low too quickly. Battery not fully charged on initial charge cycle. Battery must be charged for 12 to 16 hours without any interruption. -18-