Toshiba MEG50AS User Manual - Page 33

Troubleshooting When you find any problems with the player, check the following items before requesting service. Welcome Getting Ready Using the Player Problem The power cannot be turned on or the buttons do not function. The battery is quickly exhausted after charging. Playback cannot be performed. No sound. Audio data cannot be transferred or erased. The charge indicator blinks orange. The charge indicator does not light when charging is attempted. Cause The remaining power of the built-in battery is insufficient. The Hold status has been selected. The button was pressed too quickly. A personal computer is connected. The battery has failed. The HDD Card has not been inserted. No audio data is present. Headphones are not been connected. The minimum volume level has been selected. The player has not been properly connected to a personal computer. The cables have not been properly connected. The cables have not been properly connected. The ambient temperature is out of the permitted range. Remedy Connect the AC adapter and charge the built-in battery. Page 20 Slide back the HOLD switch to cancel the Hold status. 18, 29 To turn the power on, press and 22 hold the PLAY/PAUSE button ( ) for more than 2 seconds. When the player is connected to MOBILPHILE a personal computer, the player Application Software cannot be operated. owner's manual Replace with a new battery. For 11 replacement of the built-in battery, ask the store of purchase. Insert the HDD Card. 21 Transfer audio data using the TOSHIBA Audio Application. Check the headphones, wired remote control, and player connections. Adjust the volume. MOBILPHILE Application Software owner's manual 23 24 Check the connection with a personal computer. MOBILPHILE Application Software owner's manual Check the AC adapter, power 20 cable, and player connections. Check the AC adapter, power 20 cable, and player connections. Perform charging under the 34 permitted operation tempera- ture. I Resetting If the above corrective actions do not solve the problem(s), reset the player using the following procedure: 1 Remove the AC adapter from the player. 2 Slide the battery switch to "Stop", wait for 5 seconds, then slide back the switch to "Supply." The play mode returns to initial default state. 33 Other Useful Information