Toshiba MV13N3 Owners Manual - Page 22

TV OPERATION (CONTINUED) SLEEP To set the TV/VCR to turn off after a preset amount of time, press the SLEEP button on the remote control. The clock will count down 10 minutes for each press of the SLEEP button (120, 110, ...10, 0). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting, press the SLEEP button and the remaining time will be displayed for a few seconds. To cancel the sleep timer, press the SLEEP button repeatedly until the display turns to 0. SLEEP SLEEP 120 EJECT PROGRAM VOL- REC CH- REW STOP PLAY RTEIMCER FF MENU - SET/TR + CH+ CACPLTOIOSNED 1 SLEEP 4 2 7 CALL 5 8 6 0 9 TRADCIGKIITNAGL ENTER CANCEL RCEHTUARNNNEL SP/SLP MUTE RETZUERRNO 3 SKIP RCEOSUENTTER INPUT SEARCH POWER SELECT VOL+ PAUSE/STILL CLOSED CAPTION Press this button to switch between normal TV and the two closed caption modes (captions and full screen text). Closed captioning will display text on the screen for hearing impaired viewers. CHANNEL RETURN This button allows you to go back to the last channel selected by pressing the CHANNEL RETURN button. Press this button again to return to the last channel you were watching. CLOSED CAPTION CHANNEL RETURN CH 012 CAPTION CH 1 NOTES: • If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder text may not appear. In this case, adjust the antenna for better reception or use an outdoor antenna. • When activating the Closed Captioned Decoder, there will be a short delay before the Closed Captioned text appears on the screen. • Closed Captioned TV programs can be recorded and played back on a VCR with the Closed Captioned text intact. The Closed Captioning text will disappear during Cue, Rewind and Pause modes or if the VCR tracking is not adjusted properly. 20 • Closed Captioned text is only displayed in locations where it is available. • If the Call display is on, the Closed Captioning text will not appear.