Toshiba MV13N3 Owners Manual - Page 45

5 Set the start time, end time, channel and tape speed as in step 4. SET/TR ENTER TIMER REC SET DATE START END CH SPEED 23 (THU) 7 : 00 PM 9 : 30 PM 007 SLP 〈+/-/ENTER/CANCEL/MENU〉 23 TH 7:00PM 9:30PM 007 SLP ENTER/CANCEL/MENUñ 5 EJECT PROGRAM VOL- REC CH- REW STOP PLAY RTEIMCER FF MENU - SET/TR + CH+ CACPLTOIOSNED 1 SLEEP 4 2 7 CALL 5 8 6 0 9 TRADCIGKIITNAGL ENTER CANCEL RCEHTUARNNNEL SP/SLP MUTE RETZUERRNO 3 SKIP RCEOSUENTTER INPUT SEARCH POWER SELECT VOL+ PAUSE/STILL 7 6 To set the timer for another program, press the SET/TR + or - button until the number of the second program blinks, then press the ENTER button. Repeat steps 4 to 5 to set the second program. 4 7 Press both the TIMER REC buttons at the same time. The TIMER REC indicator will light. The Timer is programed, when the programed time is reached, the recording is automatically started. TIMER REC TIMER REC 5 To cancel timer recording, press both the buttons again and TIMER REC indicator will go off. NOTES: • The VCR section cannot be used while the TIMER REC indicator is lit. If you want to use the VCR operation, press both the TIMER REC buttons at the same time to deactivate the timer. • After a power failure or disconnection of the power plug, all programed recording setting and time display will be lost upon resumption of power. In this case, reset the clock (see pages 15-17) and reprogram any timer recordings. • If you want to correct the digits while setting, press the CANCEL button until the item you want to correct, then press the SET/TR + or - button to correct the desired setting. 43