Toshiba PA5116A-2PRP High Speed Port Replicator III User's Guide for PA5116U/P - Page 12

Quick Tour 12 When your computer is docked in the port replicator, the following ports on the computer, if present, are not operational: ❖ Network port ❖ Audio ports (Microphone jack or Headphone/Line out) If you want to use the docked computer's audio ports, you can enable them as shown in "Configuring audio ports" on page 19. Otherwise, use the ports on the port replicator instead. Component Eject lever Microphone jack Line out (Headphones, Speakers) LAN active light Network port Description Undocks the computer from the port replicator. Note 1: Please refer to the "Undocking your computer" section to learn how to disconnect your computer from the port replicator properly. Note 2: When the Port Replicator lock switch is in the locked position, the Eject lever cannot be operated. For more information on the Port Replicator lock switch, see "Securing your port replicator" section for details. A standard 3.5 mm mini jack for mono audio input from a microphone. A standard 3.5 mm mini jack for audio output to speakers, a headphone or headset, or other audio out devices. Glows orange when the computer is exchanging data with the network. Connection point for a network cable. Supports: *Ethernet (10 megabits per second, 10BASE-T) *Fast Ethernet (100 megabits per second, 100BASE-T) *Gigabit Ethernet (1000 megabits per second, 1000BASE-T) Note: Gigabit Ethernet support is only available if your computer model also supports it.