Toshiba PA5116A-2PRP High Speed Port Replicator III User's Guide for PA5116U/P - Page 22
Power issues, becomes too high, the computer will
View all Toshiba PA5116A-2PRP High Speed Port Replicator III manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Power issues 22 ❖ USB issues ❖ Network issues ❖ Hardware issues ❖ Audio issues Power issues Problem Solution(s) Docked computer will not turn on (Your computer's AC power light does not turn on) Check the connections. Make sure the power cord is firmly connected to the port replicator and a live electrical power outlet. Check the condition of the power cord and plug prongs. If the cord is frayed or damaged or the plug prongs are bent, replace the cord. If the plug prongs are soiled, wipe them with a clean cloth. Disconnect and reconnect the AC adaptor and try again to turn on the computer. Check to make sure that the computer is properly connected to the port replicator. If the port replicator still does not power the computer, contact Toshiba support. For contact information, please see "If you need further assistance" on page 26. Docked computer enters Resume mode and shuts down If the computer's internal temperature becomes too high, the computer will automatically enter Resume mode and shut down. Leave the computer off until its interior reaches room temperature. If the computer has reached room temperature and still does not start, or if it starts but shuts down quickly, contact Toshiba support. For contact information, please see "If you need further assistance" on page 26. Docked computer shuts down and its AC power light is flashing Indicates a problem with the heat dispersal system of the computer. Please contact Toshiba support. For contact information, please see "If you need further assistance" on page 26.