Toshiba Portege M700 PPM70C-0090GC Users Manual Canada; English - Page 194

HW Setup & BIOS Setup SATA Controller Mode This feature sets the SATA Controller Mode. The SATA Controller Mode is supported with some models. AHCI Compatibility Sets AHCI which is the mode for Windows Vista® (Default). Sets the mode for legacy OS. Use this mode when the driver corresponding to AHCI is not used. USB Sleep and Charge function This section describes the settings for "USB Sleep and Charge function". For more information, please refer to the USB Sleep and Charge function section in Chapter 3, Hardware, Utilities and Options. The default setting in BIOS Setup is [Disabled]. Changing the setting to [Enabled] enables the use of this function. There are two modes, Mode-1 and Mode-2 in [Enabled]. For normal use, set the setting to Mode-1. If the function does not work with Mode-1 setting, change it to Mode-2. Some external devices may not be able to use this function in either mode. When this happens, change the setting to [Disabled]. Enabled (Mode-1) Enabled (Mode-2) Disabled Enables USB Sleep and Charge function. Enables USB Sleep and Charge function. Disables USB Sleep and Charge function (Default). User's Manual 7-13