Toshiba Qosmio F50 PQF55C Users Manual Canada; English - Page 118

Operating Basics Connecting the modular cable To connect the modem's modular cable, follow the steps as detailed below: ■ Connection to any communication line other than an analog phone line could cause a computer system failure. ■ Connect the built-in modem only to ordinary analog phone lines. ■ Never connect the built-in modem to a digital line (ISDN). ■ Never connect the built-in modem to the digital connector on a public telephone or to a digital private branch exchange (PBX). ■ Never connect the built-in modem to a key telephone system for residences or offices. ■ Avoid using your computer modem with the telephone cable connected during an electrical storm. There may be a remote risk of electric shock from lightning. 1. Plug the end of the modular cable into the computer's modem jack. 2. Plug the other end of the modular cable into a telephone jack. RJ11 Figure 4-10 Connecting the internal modem Do not pull on the cable or move the computer while the cable is connected. Disconnecting the modular cable To disconnect the modular cable, follow the steps as detailed below: 1. Pinch the lever on the plug in the telephone jack and pull it out from within the connector. 2. Pinch the lever on the plug in the computer's modem jack and pull it out from within the computer. FM tuner This section describes how to connect the FM tuner antenna to the computer's FM antenna port. Use the FM Radio of Windows Media Center to listen to FM radio. Some models are equipped with a modem jack or FM antenna port. User's Manual 4-38