Toshiba SD-P4000 Owners Manual - Page 31

Basic playback Playing a disc This section shows you the basics on how to play a disc. CAUTION Keep your fingers well clear of the disc slot as it is closing. Neglecting to do so may cause serious personal injury. POWER VOLUME +/- PLAY STOP EJECT DVD VCD Basic playback CD Preparations: • When connecting to other equipment, turn the power off. 1 Press POWER on the unit or on the remote control to turn on the unit. The Power indicator will light. • Every time you press POWER, the TV/DVD starts from TV mode. • When using an amplifier, switch on the amplifier. 4 On the TV-screen, "No Disc" changes to "Reading" and then playback commences. No Disc Reading 2 Press TV/DVD on the remote control to select DVD mode. The DVD startup screen will appear on the screen. "Reading" display will change to "No Disc". (If DVD disc has already loaded, playback will start No Disc automatically.) • A menu screen will appear on the TV screen, if the disc has a menu feature. Press / or / to select title, then press ENTER. Title is selected and play commences. 5 Press VOLUME + or - to adjust the volume. Basic playback 3 Load the disc in the disc slot. VOLUME 32 Load the disc in the disc slot with the label side facing forward. (If the disc has a label.) Hold the disc without touching either of its surfaces, align it with the guides, and place it in position. Note: When you playback the 8cm disc, you need an adapter (not supplied). 6 Press STOP to end playback.  Resuming facility • The unit records the stopped point, depending on the disc. " " appears on the screen. Press PLAY to resume playback (from the scene point). • If you press STOP again or unload the disc ("" appears on the screen.), the unit will clear the stopped point.  To start playback in the stop mode Press PLAY. J5N00201A [E] (P31-35) 31 Note: If the unit does not operate properly: Static electricity, etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again. 31 6/8/04, 4:08 PM