Toshiba SD-V392 User Manual - Page 19
Connecting to an audio system and TV equipped with S-video input/component video inputs - progressive scan dvd vcr
UPC - 022265411254
View all Toshiba SD-V392 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
S-video output/input An S-Video connection is superior to Video (Yellow) output. Use this method for DVD playback when the connected television has SVideo input, and does not have component video inputs. Component video outputs/inputs PROGRESSIVE outputs/inputs Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video signal. Connecting to these inputs allows you to view the highest quality pictures with less flicker. INTERLACED outputs/inputs Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy the highest quality DVD picture playback. Notes: • Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR) • In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance. Connecting to an audio system and TV equipped with S-video input/component video inputs Note: The S-video output and component video output transports the DVD-video signal exclusively and will deliver enhanced DVD video picture performance. Signal flow Connections (white) To ANALOG AUDIO OUT (red) To SVIDEO OUT To PR/CR VIDEO OUT To PB/CB VIDEO OUT To wall outlet To Y VIDEO OUT When you make this connection, set the S-VIDEO/ COMPONENT Video selector switch to the desired position. And also you must select the corresponding video input on your TV. Component video cable (not supplied) To Y video input To PB/CB video input Audio cable (not supplied) To audio inputs of the amplifier (red) (white) To PR/CR video input To S-video input S-video cable (not supplied) If you connect the DVD/VCR to your TV with the DVD OUT jacks, select the corresponding video input on your television to watch DVD video discs. TV or monitor with ColorStream® component video inputs Audio system Notes: • Refer to the owner's manual of the connected equipment as well. • When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. • If you place the DVD/VCR near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD/ VCR away from the tuner and radio. • The output sound of the DVD/VCR has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. • Turn off the amplifier before you connect or disconnect the DVD/VCR's power cord. If you leave the amplifier power on, the speakers may be damaged. • When connecting to a TV using the Video or S-video jack, make sure that the Progressive indicator " " on the display window is not lit. If it is lit, the Video and S-video outputs do not feed the correct signals and you cannot see any picture. To turn off the Progressive indicator, select PROGRESSIVE scan Off (see page 66). 19 2C53301C (E)p18-25 19 21/4/04, 11:10