Toshiba SDK1000KU Owners Manual - Page 18

Basic playback Playing a Disc This section shows you the basics on how to play a disc. CAUTION Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. Basic playback Preparations • When you want to view a disc, turn on the TV and select the video input connected to the DVD player. • When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected to the DVD player. 1 Press the ON/STANDBY button. The DVD player turns on. To start playback in the stop mode Press PLAY. 2 Press OPEN/CLOSE. The disc tray opens. 3 Place the disc on the disc tray. With the playback side down To pause playback (still mode) Press PAUSE/STEP during playback. To resume normal playback, press the PLAY button. • The sound is muted during still mode. To stop playback Press STOP. • There are two different disc sizes. Place the disc in the correct guide on the disc tray. If the disc is out of the guide, it may damage the disc and cause the DVD player to malfunction. • Do not place a disc which is unplayable in this DVD player. 4 Press OPEN/CLOSE to close the disc tray. Playback starts. If you insert a DVD that contains a top menu, a menu may appear. Use / / / to select the title you want to view, then press ENTER to start playback. • You may need to press the TOP MENU or MENU button to display disc menu (depending on the actual DVD.) Notes • If the disc tray is holding a disc you have already played, playback will begin from the location where you last stopped. • Some video CD are recorded with PBC (Playback Control), a menu with recorded contents may appear on the TV if you have turned the PBC on. You can make your selection according to its PBC menu. Press the PBC button on the remote control to turn PBC on or off anytime during Video CD playback. When switching from PBC off to PBC on mode, playback will start from the beginning of the disc. To turn on the menu display again, press the RETURN button. 18 To remove the disc Press OPEN/CLOSE. Remove the disc after the disc tray opens completely. Be sure to press the OPEN/CLOSE button to close the disc tray after you remove the disc. To turn the power off Press ON/STANDBY button to turn the unit off. Automatic Power Off function If the DVD player is stopped, or the screen saver is engaged for approximately 20 minutes, the DVD player will automatically turn itself off. Notes • Do not move the DVD player during playback. Doing so may damage the disc. • Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the DVD player to malfunction. • Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD player to malfunction. • In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the STOP button on your remote control once the movie is completed.