Toshiba Satellite L300 Maintenance Manual - Page 159
MDC Module
View all Toshiba Satellite L300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
4 Replacement Procedures 4.5 MDC Module 4.5 MDC Module Removing the MDC Module Remove the MDC Module (Modem Daughter Card) according to the following procedures and Figures 4-10, after checking that the computer is turned off in boot mode. CAUTION: Remove the MDC module after turning off the computer. If this is violated, the computer or MDC module can be damaged. 1. Remove the two M2x3 black flat head screws securing the MDC module. 2. Left the MDC module and disconnect it from CN6 on the system board. 3. Disconnect the MDC cable from connector J2 on the MDC card. CAUTION: Do not touch the connectors on the MDC module or in the computer. Contaminated connectors can cause MDC module failures. M2x2.6 black flat head screw MDC card J2 MDC cable J1 CN6 Figure 4-10 Removing the MDC module 4-24 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual