Toshiba Satellite L630-ST2G02 Maintenance Manual - Page 142
Bridge Media, Removing the Bridge Media
View all Toshiba Satellite L630-ST2G02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
4 Replacement Procedures 4.2 Battery Pack/Bridge Media 4.2.2 Bridge Media Removing the Bridge Media Remove the Bridge Media according to the following procedures and Figure 4-2, after checking that the computer is turned off in boot mode. 1. Push a Bridge media. It will pop out partly when you release, so pull out the Bridge media. Memory card Figure 4-2 Removing the Bridge Media Installing the Bridge Media Install the Bridge Media according to the following procedures and Figure 4-2, after checking that the computer is turned off in boot mode. 1. Insert a Bridge media and press it until it is securely connected. After the Bridge media is installed, check the hardware configuration in the Hardware Setup or TSETUP program to make sure that the Bridge media is compatible with the current hardware configuration. 4-10 Satellite/Satellite Pro/L630/L635 Maintenance Manual