Toshiba Satellite L630-ST2G02 Maintenance Manual - Page 173
Replacement Procedures, CAUTION, Installing the LED Module
View all Toshiba Satellite L630-ST2G02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
4.16 LED Module (LED panel) 4 Replacement Procedures Installing the LED Module NOTE: LCD/FL cable must be carefully peeled away before disconnecting it from the module. Install the LED module according to the following procedures and Figures 4-24, 4-25. 1. Turn the LED upside down. 2. Connect the LED cable to the LED module connector. 3. Turn the LED right side up. 4. Place the LED bracket in the correct position and secure it with two M2x2.5 black flat head screws on each side. 5. Please the LED module in the correct position and secure it with one M2.6x6 black flat heat screws on each side. 6. Connect CCD cable to CCD module CAUTION: When installing the LED module, please follow below instruction: When plug in LED cable into LED module connector, need to plug horizontally. For Sharp panel, if LED cable connector is not plugged horizontally, it may be damaged. Satellite/Satellite Pro/L630/L635 Maintenance Manual 4-41