Toshiba Satellite M20 User Guide - Page 153
Start, Control Panel, Printers and Other, Hardware, Toshiba HWSetup, Pointing Devices
View all Toshiba Satellite M20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
153 Expansion Options Using a mouse Using a PS/2 mouse simultaneously with AccuPoint II When you connect a PS/2-compatible mouse to the PS/2 port, you may use the mouse, the AccuPoint II, or both: When connecting any PS/2 device, turn off your computer to prevent any possible hardware damage. If you connect a PS/2 mouse to the computer while it is in Standby mode, you will not be able to use the mouse when you turn the computer on. 1 Click Start, Control Panel, then Printers and Other Hardware. 2 Click the Toshiba HWSetup icon. 3 Select the Pointing Devices tab. 4 Under Pointing Devices Options, select one: ❖ Auto-selected - configures the PS/2 mouse to work when it is connected at power on, or the AccuPoint II to work otherwise. Auto-selected is normally the default option. ❖ Simultaneous - configures both the AccuPoint II mouse and PS/2 mouse to work with the computer at the same time. You must reboot the computer for the settings to take effect. HINT: When Auto-selected is the default, the computer can not detect a PS/2 mouse if you connect it after booting the computer. This can be changed in Toshiba Hardware Setup. 5 Click OK.