Toshiba Satellite Pro A210 Maintenance Manual - Page 141
General, Replacement Procedures
![]() |
View all Toshiba Satellite Pro A210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
4.1 General 4 Replacement Procedures 4 1 4.1 General This chapter explains how to disassemble the computer and replace Field Replaceable Units (FRUs). Some replacement procedures may not require you to remove all the surrounding FRUs to replace only one FRU. The chart below shows the FRUs in the order in which they should be removed in a top-down manner, irrespective of their physical locations. The FRUs shown in the top area of the chart should normally be removed before removing the FRUs shown in the bottom area. To replace the FRUs, first identify the suspect FRU for the system failure. Next, according to this chart, determine the FRUs that need to be removed before removing the suspect FRU. After you determine those FRUs, go to the appropriate sections according to the section numbers shown in the boxes. Then start removal and replacement. 4. 2 HDD 4. 3 ODD Bay Module 4.9 Top Cover 4. 4 Speaker cover and Keyboard 4. 5 Switch Board 4. 6 MDC Module 4. 7 Wireless LAN Card 4. 8 Display Assembly 4. 10 Speakers 4. 20 Touch Pad and Touch Pad Board 4.11 USB and CRT Cable, Fingerprint Board and Bluetooth Card 4. 12 System Board, AC-IN cable and Fan 4. 13 VGA Card 4. 14 4. 15 Cooling Module CPU 4. 16 Display Mask 4. 17 FL Inverter Board 4. 18 CCD Board and MIC 4. 19 LCD Modules How to use the chart (two examples): • For removing the System Board: First, remove the top cover with the display assembly. Then, remove the HDD, selectable bay module, Bluetooth card, keyboard, and wireless LAN card, all of which are shown above the top cover with the display assembly. • For removing the LCD Module: First, remove the display mask and FL inverter board, both of which are shown above the LCD module. 4. 2 HDD 4. 3 ODD Bay Module 4.9 Top Cover 4. 10 Speakers 4. 20 Touch Pad and Touch Pad Board 4. 4 Speaker cover and Keyboard 4. 5 Switch Board 4. 6 MDC Module 4. 7 Wireless LAN Card 4. 8 Display Assembly 4.11 USB and CRT Cable, Fingerprint Board and Bluetooth Card 4. 12 System Board, AC-IN cable and Fan 4. 13 VGA Card 4. 14 4. 15 Cooling Module CPU 4. 16 Display Mask 4. 17 FL Inverter Board 4. 18 CCD Board and MIC 4. 19 LCD Modules System Board LCD Module Satellite A210/A215/Satellite Pro A210/EQUIUM A210/SATEGO A210 Maintenance Manual 4-1
![](/manual_guide/products/toshiba-satellite-pro-a210ez2201-maintenance-manual-36142bf/141.png)