Toshiba Satellite Pro A210 Maintenance Manual - Page 171
Display Assembly
View all Toshiba Satellite Pro A210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
4.8 Display Assembly 4 Replacement Procedures 4.8 Display Assembly Removing the Display Assembly CAUTION: Use care to avoid that the antenna cable is not caught between the display assembly and computer. Remove the display assembly according to the following procedures and Figures 4-15, 4-16. 1. Turn the computer so the back is facing you and remove two M2.5x6 black flat head screws. 2. Restore the normal computer placement and open the display panel. M2.5x6 black bind screw Figure 4-15 Removing the screws from the back of the computer 3. Disconnect the LCD/FL cable from CN3 on the system board. 4. Disconnect the CCD cable from CN7 on the system board. 5. Disconnect the MIC cable from MIC extended cable. 6. Remove four M2.5x8 black flat head screws securing the LCD module to the top cover. 7. Remove the wireless antenna cables from the top cover. 8. Remove the display module. Satellite A210/A215/Satellite Pro A210/EQUIUM A210/SATEGO A210 Maintenance Manual 4-31