Toshiba TD-E502 Users Guide for Model TD-E432 TD-E502 TD-E552 TD-E652 - Page 24
dissipating holes in the display. See s
View all Toshiba TD-E502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
TSB.book Page 24 Monday, August 31, 2015 4:30 PM 24 Chapter 2 Preparation for use To prevent the display from falling: Install the display with metal brackets for wall or ceiling installation (commercially available) in your own responsibility. For detailed procedures of installation, refer to the instructions of the metal brackets. To reduce the probability of injury and damage, be sure to consult the bracket manufacturer for installation location. To reduce the risk of falling in case of unexpected shocks, earthquakes or other disasters, attach a rope to the left of the display and secure the rope to the wall display. The display may topple over or fall in case of earthquake or other disaster. Use stainless steel screws with enough strength to support the LCD display. With regard to the metal bracket: Use a VESA-compliant metal bracket (commercially available) that is strong enough to hold the display. When using a bracket, do not block the heat dissipating holes in the display. See pages 20-21. Before installation, make sure that the installation surface has sufficient strength. For details of the mounting procedure and the safe installation procedure, see the user instructions of the metal bracket (commercially available) to be used. Take measures such as using multiple metal brackets, holding the display at several points, and taking measures to prevent falling or dropping in case of a problem.