Toshiba TD-E502 Users Guide for Model TD-E432 TD-E502 TD-E552 TD-E652 - Page 29
Connecting with a digital video source
View all Toshiba TD-E502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
TSB.book Page 29 Monday, August 31, 2015 4:30 PM Connecting with a digital video source Chapter 2 Preparation for use 29 Digital connection: Connection via the HDMI IN connector (1) Connect an HDMI cable (commercially available) to the HDMI1 IN or HDMI2 IN connector. (2) Select [HDMI1] or [HDMI2] according to the connected connector by pressing the SOURCE button on the LCD display or the HDMI1 or HDMI2 button on the infrared remote control. Connection via the DVI-D IN connector (1) Connect a DVI-D cable (commercially available) to the DVI-D IN connector. (2) Select [DVI-D] using the SOURCE button on the LCD display or the DVI-D button on the infrared remote control. Second display connection: Connect the DVI-D OUT connector on the first display and the DIVI-DIN connector on the second display using a DVI-D cable (commercially available). The daisy chain connection allows up to 9 LCD displays to be connected (when using 2-meter cables. However, the maximum number of connectable LCD displays may be limited. It is recommended to check the number of connectable LCD displays in your installation environment in advance. Set the power off time using the POWER SAVE selection in the SETUP menu. Tiling mode can be used in HDMI1/2 for multi displays, if there is an external HDMI splitter equipped. Audio connection: For HDMI 1/2/DVI-D, the default setting of audio source is a TMDS signal with HDMI/ DVI cable. Users can use an external audio source if an audio cable (ø3.5-mm stereo mini) (commercially available) is connected to the LINE IN connector. LINE IN should be selected for the audio input source; see "Audio settings" on page 42. To output the audio to the second display, connect the LINE OUT connector on the first display and LINE IN connector on the second display using an audio cable (ø3.5-mm stereo mini) (commercially available). LINE IN should be selected for the audio input source when an HDMI cable is connected; see "Audio settings" on page 42.