Toshiba TDP-T9 User Manual - Page 23

Connection Before connection • Read the owner's manual of the device you are connecting to the projector. • Some types of computer cannot be used or connected to this projector. Check for an RGB output terminal, supported signal p.44 , etc. • Turn off the power of both devices before connecting. • The figures are sample connections. • The MONITOR terminal outputs analog RGB signals or component video signals (Y/PB/ PR) from the COMPUTER IN terminals as selected with the INPUT button. If no input is selected, the MONITOR terminal outputs the input signals last selected among the COMPUTER terminals. • A computer monitor usually cannot accept Y/PB/PR signals correctly. Monitor Computer (for control) AV cable (not supplied) To video output To audio input Audio cable (not supplied) To RS-232C terminal Control cable MONITOR AUDIO IN COMPUTER S-VIDEO VIDEO CONTROL AUDIO OUT Computer RGB cable (supplied) To RGB output AV cable (not supplied) To S-video output Audio cable (not supplied) To audio output Notes • Moving pictures played back on computers using DVD software may appear unnatural if it is projected with this projector, but it is not a malfunction. • When an AUDIO OUT terminal is connected, sound is not output from the projector speaker. • Output volume of AUDIO OUT terminal can be adjusted by the VOL button. 24