Toshiba TLP 780 Owners Manual - Page 51

FULL MENU settings - Default setting CONTENTS 51 You can set the Input source, projection mode, etc. from FULL MENU [Default setting]. The relationship between input source and item Yes: Adjustable -: Not displayed To operate FULL MENU, refer to page 44 . Analog RGB(1) Analog RGB(2) Digital RGB Y/PB/PR Video S-Video Camera Input source setting : On/Off with ENTER : On/Off with (+) or (-) COMPUTER IN 1 SET Analog RGB(1) SET Y/PB/PR SET COMPUTER IN 2 SET Analog RGB(2) SET Digital RGB SET VIDEO SET S-VIDEO SET CAMERA SET : COMPUTER IN 1 connector is selectable by INPUT button : Use COMPUTER IN 1 connector as Analog RGB(1) input : Use COMPUTER IN 1 connector as Y/PB/PR input : COMPUTER IN 2 connector is selectable by INPUT button : Use COMPUTER IN 2 connector as Analog RGB(2) input : Use COMPUTER IN 2 connector as Digital RGB input : Video input is selectable by INPUT button : S-Video input is selectable by INPUT button : Camera input is selectable by INPUT button Yes (common for all of the inputs) Projection mode Standard Rear Ceiling Rear ceiling SET The projector placement is set to the floor-mounted front projection mode SET The projector placement is set to the floor-mounted rear projection mode SET The projector placement is set to the ceiling-mounted front projection mode SET The projector placement is set to the ceiling-mounted rear projection mode Yes (common for all of the inputs) No signal background Logo Blue background None SET The TOSHIBA logo is displayed when no signal is input SET A blue color is displayed at full screen when no signal is input SET Nothing is displayed when no signal is input Yes (common for all of the inputs) No signal power off Off 5 min. SET The projector continues work even if the no signal status continues SET The power turns off automatically if the no signal status continues for approx. 5 min. Yes (common for all of the inputs) Power on Manual Auto SET The power turns on by pressing the ON/STANDBY button SET When the power cord is plugged, the power turns on Yes (common for all of the inputs) Startup screen On Off SET The opening picture is displayed when the power is turned on SET The opening picture is not displayed when the power is turned on Yes (common for all of the inputs) Reset EXEC. The settings of FULL MENU [Default setting] are returned to the factory default setting Yes (common for all of the inputs) Adjustments & Settings Notes • It is impossible to exit from the menu if no input source is selected. • If the check in the check box for the currently selected source is removed, the setting becomes effective the next time the input is changed. • In the following conditions, the function to detect no signal ("No signal background", "No signal power off") does not act: 1) When "Video mode" 46 is set to other than [Auto] with selection of Video input or S-Video input. 2) When "Signal format" 46 is set to other than [Auto] with selection of Y/PB/PR input. • Note that the projector automatically turns on at the restoration from power failure, if "Power on" is set to [Auto] with the power cord being pluged, even if it is not intended to. • Even if "Power on" is set to [Auto], the setting of [5 min.] of "No signal power off" is effective. • Each item can be set at all input sources, but the settings made at one input source are applied to commonness for all input sources. • The settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is unplugged or if a power failure occurs while the projector is on, the settings are not memorized.