Toshiba TLP-WX2200U Owners Manual
Toshiba TLP-WX2200U - WXGA LCD Projector Manual
 |
UPC - 032017904279
View all Toshiba TLP-WX2200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Toshiba TLP-WX2200U manual content summary:
- Toshiba TLP-WX2200U | Owners Manual - Page 1
OWNER'S MANUAL 3LCD DATA PROJECTOR TLP-WX2200 Others Maintenance Operations Preparations Before Using - Toshiba TLP-WX2200U | Owners Manual - Page 2
operating and maintenance (servicing) instructions in the literature MODEL NAME: TLP-WX2200 USA only TRADE NAME: DATA PROJECTOR Tested To Comply With FCC Standards FOR HOME OR OFFICE USE MODEL NAME: TLP-WX2200 technician for help. RESPONSIBLE PARTY: TOSHIBA AMERICA INFORMATION SYSTEMS, INC. 9740 - Toshiba TLP-WX2200U | Owners Manual - Page 3
. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 1. Read Owner's Manual After unpacking this product, read the owner's manual carefully, and follow all the operating and other instructions. 3. Source of Light Do not look into the lens while the lamp is on. The strong light from the lamp may - Toshiba TLP-WX2200U | Owners Manual - Page 4
operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may lamp rupturing, thoroughly clean the area around the projector and discard any edible items placed in that area. 18. Servicing Do not attempt to service - Toshiba TLP-WX2200U | Owners Manual - Page 5
INSTRUCTIONS (Continued) 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement not look into the laser light source of the remote control or direct the laser pointer malfunction, and shorten the life of the projector. • Avoid locations with - Toshiba TLP-WX2200U | Owners Manual - Page 6
result, the life of the LCD is shortened and a malfunction may also occur. Clean the air filter from time to time and replace it regularly. It is recommended that this replacement be done at the time of replacing a lamp. (Ask a dealer where the unit was purchased or your nearby service station about - Toshiba TLP-WX2200U | Owners Manual - Page 7
Status display 43 12 Maintenance About lamp ...44 Lamp replacement 45 Air filter cleaning 47 Lens and main unit cleaning 48 Others Trouble indications 49 Before calling service personnel 50 Specifications ...51 List of general specifications 51 List of supported signals (RGB signals 52 List - Toshiba TLP-WX2200U | Owners Manual - Page 8
(11) Air exhaust (12) Tilt adjuster (13) Lamp cover (14) Foot adjuster (15) Air filter (16) Lens : Senses commands from the remote control. p.19 : Press to set up or stow the foot adjuster. p.27 : Draws in air from outside the projector. : Operates the projector. p.16 : Adjusts screen size. p.27 - Toshiba TLP-WX2200U | Owners Manual - Page 9
CLICK button : Functions as left-click of a mouse. p.20 (27) Remote control code switch : Sets the code of remote control to that of the projector. (inside the battery cover) p.42 Note • For the remainder of this manual, buttons are referred to as follows: Selection buttons ⇒ ; ENTER button - Toshiba TLP-WX2200U | Owners Manual - Page 10
sensor, and press a button on the remote control. • Operating the projector from the front Approx. 15° Approx. 5m Two batteries (LR03, SIZE AAA) are used. e Replace the battery cover. When operating the remote control from behind the projector, the light is reflected on the projecting surface and - Toshiba TLP-WX2200U | Owners Manual - Page 11
XP, or Windows Vista™ OS, that is equipped with a USB port which can support USB1.1 (The mouse remote control receiver is also supported on OS 9 or OS X for the Macintosh). However, please note that Toshiba does not guarantee the operation of all computers. 1 Connecting a computer Connect the mouse - Toshiba TLP-WX2200U | Owners Manual - Page 12
manual of the device you are connecting to the projector. • Some types of computer cannot be used or connected to this projector. Check for an RGB output terminal, supported p.54 terminal To audio output White (L)/Red (R) Audio cable (not supplied) Control cable To S-video output S-video cable - Toshiba TLP-WX2200U | Owners Manual - Page 13
the beep sound is [On], the projector beeps, the power turns on, and the ON/STANDBY indicator lights in green. After a moment, the startup screen appears. Control panel Remote Control CAUTION • Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your - Toshiba TLP-WX2200U | Owners Manual - Page 14
any resolutions not supported by this projector (WXGA) will be expanded or shrunk, which will affect image quality slightly. To view high-quality images, it is recommended that the computer's external output should be set to WXGA resolution. • With some models of computer having LCD displays or the - Toshiba TLP-WX2200U | Owners Manual - Page 15
Image adjustment menu p.36 . Remote Control Notes • The image may not be projected or auto adjustment/setting may not be performed correctly for input signals other than those supported by the projector p.52 , p.53 . • If auto setting fails adjustment, adjust manually with [Position] in the Image - Toshiba TLP-WX2200U | Owners Manual - Page 16
the picture and sound temporarily (Mute) When you want to project the images of another projector, overhead projector, etc. temporarily, this projector's images and sound can be turned off. Press the remote control's MUTE button. The picture and sound are cut off. (The Mute function is released when - Toshiba TLP-WX2200U | Owners Manual - Page 17
when password is [On] 1 Turn on the power. 2 The lamp lights and the password entry screen appears. 3 Enter the password using numeric keys of the remote control. If the entered password is correct, the start-up screen appears and the projector goes into normal operation. If the password is wrong - Toshiba TLP-WX2200U | Owners Manual - Page 18
conduct a number of adjustments and settings using the operation buttons p.16 on the control panel (main unit side) and remote control. ■ How to use the menus The menu shown below is for operation instructions purposes and might differ from the actual display. 1. Press the MENU button Display the - Toshiba TLP-WX2200U | Owners Manual - Page 19
to reduce screen noise. reduction*1 On (Enable) Off (Disable) NCE mode Press . Toggle the NCE mode with . 1/2/3 / / R-level Adjust red of the image color. Less red More red G-level Adjust green of the image color. Less green More green B-level Adjust blue of the image color. Less - Toshiba TLP-WX2200U | Owners Manual - Page 20
] Logo/Blue/None Icon Display icons as function guides On Off Start-up screen Display start-up screen White Logo confirmation Press . Reset logo Yes No 38 Detailed description is the same as the projected screen. [Background] • TOSHIBA is set for [Logo] by factory setting. • If user - Toshiba TLP-WX2200U | Owners Manual - Page 21
can preview the registered logo. You can reset the registered logo, display style (Manual), or when the power cord is plugged in (Auto). Manual Auto Sets the lamp when restored after a power outage, the projector will come on. [Lamp power] When [Lamp power] is set to [Low], the - Toshiba TLP-WX2200U | Owners Manual - Page 22
. • To release the key lock, set the [Key Lock] to [Off] using remote control. Pressing the [RETURN] button on the projector for 10 seconds also sets the [Key Lock] to [Off]. (When operating the main unit, the 2 indicators of LAMP and TEMP light in orange for 3 seconds, and at the same time the - Toshiba TLP-WX2200U | Owners Manual - Page 23
depends on condition of use.) If this happens, replace it with a new one. WARNING • If the projector is mounted on the ceiling, it is recommended to use your Toshiba dealership when the lamp has to be exchanged. Uncovering the lamp while the projector is mounted on a ceiling may lead to a danger - Toshiba TLP-WX2200U | Owners Manual - Page 24
cover is no longer loose. 7 Reset the lamp time. See the lamp's manual for instructions on resetting the lamp time. Notes and Precautions • The [Lamp time] item in the Status display menu indicates the time of lamp use (as a rough guide) p.43 • Please replace the lamp after 2000 hours of use with - Toshiba TLP-WX2200U | Owners Manual - Page 25
your projector dealership. Attempting to clean/replace the lamp at Trouble indications The indicator lights to inform you of internal abnormalities. No power ⇒ Problem with projector (Off) • Unplug the power cord, and contact your dealer. (Red (Red lit) flashing) Or (Red lit) (Red lit) Lamp - Toshiba TLP-WX2200U | Owners Manual - Page 26
's supported range? p.21 • Is the projector's screen placement angle tilted too far? p.21 • Are the sharpness or sampling phase adjustments off? p.36 Image is dark • Are the brightness or contrast adjustments off? p.36 • Is the lamp nearing the end of its service life? p.43 Colors too light Bad - Toshiba TLP-WX2200U | Owners Manual - Page 27
Specifications (Continued) ■ List of supported signals (RGB signals) This projector supports the following RGB signals. Note, however, that depending on the computer model, the screen may show flicker or streaking. Please adjust the projector if this happens. Resolution 720 x 400 640 x 480 800 x - Toshiba TLP-WX2200U | Owners Manual - Page 28
only ASCII-compliant all-uppercase alphanumeric characters supported. 4 Replies Acknowledge ACK (06h) consecutively, wait for the response from the projector before sending the next command. ● Main control cable and other commands. ■ Separately sold product Replacement Lamp Model TLPLW11 54 - Toshiba TLP-WX2200U | Owners Manual - Page 29
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
 |
 |
Others
Maintenance
Operations
Preparations
Before Using
OWNER’S MANUAL
3LCD DATA PROJECTOR
TLP-WX2200