Toshiba TLP-WX2200U Owners Manual - Page 11

Operating a computer using the remote control, Placement

Page 11 highlights

Operating a computer using the remote control A computer can be operated using the projector's remote control. This function is available on any computer with the Windows® 98/98SE, Windows® Me, Windows® 2000, Windows® XP, or Windows Vista™ OS, that is equipped with a USB port which can support USB1.1 (The mouse remote control receiver is also supported on OS 9 or OS X for the Macintosh). However, please note that Toshiba does not guarantee the operation of all computers. 1 Connecting a computer Connect the mouse remote control receiver (supplied) to a computer. To USB port Mouse remote control receiver The remote control may fail to operate if the mouse remote control receiver is exposed to bright sunlight or fluorescent lighting. In such a case, change position or direction of the mouse remote control receiver and retry. 2 Operating a computer Operate remote control's buttons towards the mouse remote control receiver. ● Moving the mouse pointer Press the mouse control button in the direction you wish the mouse pointer to move, then press. ● To left click Press the L-CLICK button. ● To right click Press the R-CLICK button. ● To drag and drop Holding down the L-CLICK button, move the mouse control button until the mouse pointer is over the desired location, then release the L-CLICK button. ● Using the computer's page up [↑] and down [↓] function Press the PAGE+ and PAGE- buttons to switch PowerPoint® slides. Remote Control Front Remote Control Rear Mouse control PAGE - R-CLICK L-CLICK PAGE + 20 Placement Placement Styles As shown in the figures below, this device can be placed in 4 different styles. The factory setting is "floor-mounted front projection." Set the [Projection mode] in the Default setting 2 menu, in accordance with your needs. p.42 Floor-mounted front projection Floor-mounted rear projection Ceiling-mounted front projection Ceiling-mounted rear projection WARNING • Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit. Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus resulting in injury. • If you wish to mount the projector on the ceiling, be sure to ask your dealer to do so. Mounting the projector on a ceiling requires special ceiling brackets (sold separately) and specialized knowledge. Improper mounting could cause the projector to fall, resulting in an accident. • If the projector is ceiling-mounted, install the breaker for turning off the power in case of anomaly. Let everyone involved with the use of the projector know that fact. Projection Distance and Size Use the figures, tables, and formulas below to determine the projection size and projection distance. (Projection sizes are approximate values for full-size picture with no keystone adjustment.) Screen As seen from above a (min length) = projection size (inches) - 0.9521 30.244 90° a (max length) = projection size (inches) - 0.7895 25.078 As seen from the side Lens center 90° H a a is the distance between the lens and the screen, and corresponds to a range of 1.29 m (4.23 ft.) to 11.93 m (39.14 ft.). H is the height from the image bottom to the center of the lens. projection projection distance a size min length max length (zooming max) (zooming min) height (H) 40 inches 1.29 m (4.23 ft.) 1.56 m (5.12 ft.) 1.8 cm (0.06 ft.) 60 inches 1.95 m (6.40 ft.) 2.36 m (7.74 ft.) 2.6 cm (0.09 ft.) 80 inches 2.61 m (8.56 ft.) 3.16 m (10.37 ft.) 3.5 cm (0.11 ft.) 100 inches 3.27 m (10.73 ft.) 3.96 m (12.99 ft.) 4.4 cm (0.14 ft.) 150 inches 4.93 m (16.17 ft.) 5.95 m (19.52 ft.) 6.6 cm (0.22 ft.) 200 inches 6.58 m (21.59 ft.) 7.94 m (26.05 ft.) 8.8 cm (0.29 ft.) 250 inches 8.23 m (27.00 ft.) 9.94 m (32.61 ft.) 11.0 cm (0.36 ft.) 300 inches 9.89 m (32.45 ft.) 11.93 m (39.14 ft.) 13.1 cm (0.43 ft.) 21 Preparations

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

21
20
Preparations
Placement Styles
As shown in the figures below, this device can be placed in 4 different styles.
The factory setting is “floor-mounted front projection.” Set the [
Projection mode
]
in the
Default setting 2
menu, in accordance with your needs.
p.42
Placement
WARNING
Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit.
Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus
resulting in injury.
If you wish to mount the projector on the ceiling, be sure to ask your dealer to do so. Mounting the
projector on a ceiling requires special ceiling brackets (sold separately) and specialized knowledge.
Improper mounting could cause the projector to fall, resulting in an accident.
If the projector is ceiling-mounted, install the breaker for turning off the power in case of anomaly. Let
everyone involved with the use of the projector know that fact.
Floor-mounted front projection
Floor-mounted rear projection
Ceiling-mounted front projection
Ceiling-mounted rear projection
Projection Distance and Size
Use the figures, tables, and formulas below to determine the projection size and projection
distance. (Projection sizes are approximate values for full-size picture with no keystone
adjustment.)
Screen
As seen from above
As seen from the side
90
°
90
°
a
H
Lens center
a (min length) =
projection size (inches) – 0.9521
30.244
a (max length) =
projection size (inches) – 0.7895
25.078
a
is the distance between the lens and the screen,
and corresponds to a range of 1.29 m (4.23 ft.) to
11.93 m (39.14 ft.).
H
is the height from the image
bottom to the center of the lens.
Operating a computer using the remote control
A computer can be operated using the projector’s remote control.
This function is available
on any computer with the Windows
®
98/98SE, Windows
®
Me, Windows
®
2000, Windows
®
XP, or Windows Vista™ OS, that is equipped with a USB port which can support USB1.1
(The mouse remote control receiver is also supported on OS 9 or OS X for the Macintosh).
However, please note that Toshiba does not guarantee the operation of all computers.
1
Connecting a computer
Connect the mouse remote control receiver (supplied) to a computer.
Mouse remote control receiver
To USB port
2
Operating a computer
Operate remote control’s buttons towards the mouse remote control receiver.
Moving the mouse pointer
Press the mouse control button in the direction you wish the mouse pointer to move,
then press.
To left click
Press the L-CLICK button.
To right click
Press the R-CLICK button.
To drag and drop
Holding down the L-CLICK button, move the mouse control button until the mouse
pointer is over the desired location, then release the L-CLICK button.
Using the computer’s page up
[
]
and down
[
]
function
Press the PAGE+ and PAGE- buttons to switch PowerPoint
®
slides.
The remote control may fail to operate
if the mouse remote control receiver is
exposed to bright sunlight or
fluorescent lighting.
In such a case, change position or
direction of the mouse remote control
receiver and retry.
Mouse control
Remote Control Front
Remote Control Rear
PAGE –
PAGE +
R-CLICK
L-CLICK
projection
projection distance a
height (H)
min length
max length
size
(zooming max)
(zooming min)
40 inches
1.29 m
(4.23 ft.)
1.56 m
(5.12 ft.)
1.8 cm (0.06 ft.)
60 inches
1.95 m
(6.40 ft.)
2.36 m
(7.74 ft.)
2.6 cm (0.09 ft.)
80 inches
2.61 m
(8.56 ft.)
3.16 m (10.37 ft.)
3.5 cm (0.11 ft.)
100 inches
3.27 m (10.73 ft.)
3.96 m (12.99 ft.)
4.4 cm (0.14 ft.)
150 inches
4.93 m (16.17 ft.)
5.95 m (19.52 ft.)
6.6 cm (0.22 ft.)
200 inches
6.58 m (21.59 ft.)
7.94 m (26.05 ft.)
8.8 cm (0.29 ft.)
250 inches
8.23 m (27.00 ft.)
9.94 m (32.61 ft.)
11.0 cm (0.36 ft.)
300 inches
9.89 m (32.45 ft.)
11.93 m (39.14 ft.)
13.1 cm (0.43 ft.)