Toshiba XM-7002B Product Specification - Page 16
Power ON/OFF Timing - cd rom
View all Toshiba XM-7002B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
5. Functions 5.1. CD-ROM Data Configurations Figure 6 shows how the data is structured in program units. 1block=1/75 s 1-Disc TNO Time 0 TOC Min Sec Block 1 Min Sec Block Lead-in Block 1 Block 2 2 ~~ AA approx. 300kBlocks ~ Lead out SYNC 12 bytes Header User Data 2048 bytes in Mode-1 2336 bytes in Mode-2 ~ ECC(Mode-1) 288 bytes ~ ~ 4 bytes Minutes Second(0~59) Blocks(0~74) Mode ~ ~ Figure 6 CD-ROM Data Configuration 5.2. Power ON/OFF Timing Figure 7 shows the initialization. Power ON System Initialization Focus Serch Spindle ON Max 500 ms Max 2 s Max 3.5 s "Command" Receivable Learning Idle "TEST UNIT READY" Command Correspondence Can't send COMMAND Typ.13 s, Max 16 s (Single Session Disc) Any Command Sendable "Check Condition"Status "Read-Command"Acceptable "Good"Status Figure 7 Initialization Sequence 12/27 XM-7002B Rev.1.0