Tripp Lite 5P750RC Eaton 5P750RC 5P1000RC and 5P1500RC UPS Installation and Us - Page 22

6.2 Glossary Backup time Battery test Cold start Deep discharge Load Low-battery warning Normal AC input Percent load Personalisation Programmable Outlets UPS UPS ON/OFF controlled by software Time during which the load can be supplied by the UPS operating on battery power. Internal UPS test to check battery status. The devices connected to the UPS can be started even if AC input power is not available. The UPS operates on battery power alone. Battery discharge beyond the permissible limit, resulting in irreversible damage to the battery. Devices or equipment connected to the UPS output. This is a battery-voltage level indicating that battery power is low and that the user must take action in light of the imminent break in the supply of power to the load. The AC-power line supplying the UPS under normal conditions. Ratio of the power effectively drawn by the load to the maximum output of the UPS. It is possible to modify certain UPS parameters set in the factory. Certain UPS functions can also be modified by the software to better suit user needs. Controllable outlets for automatic load shedding, remote shutdown and sequential restart (personalised using software). Uninterruptible Power System. This function enables or disables initiation of UPS ON/OFF control sequences by computer power-management software 5P 750VA-1.5 KVA US_EN Page 22