Tripp Lite B0930042E4UV Owners Manual for B093- B097- and B098-Series Console - Page 222
Network Hosts
View all Tripp Lite B0930042E4UV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
14. Configuration from the Command Line 14.1.5 Network Hosts To determine the total number of currently configured hosts: # config -g config.sdt.hosts.total Assume this value is equal to 3. If you add another host, make sure to increment the total number of hosts from 3 to 4: # config -s config.sdt.hosts.total=4 If the output is config.sdt.hosts.total , assume 0 hosts are configured. Add Power Device Host To add a UPS/RPC network host with the following details: IP address / DNS name 192.168.2.5 Host name remoteUPS Description UPSroom3 Type UPS Allowed services ssh port 22 and https port 443 Log level for services 0 Issue the commands below: # config -s config.sdt.hosts.host4.address=192.168.2.5 # config -s config.sdt.hosts.host4.name=remoteUPS # config -s config.sdt.hosts.host4.description=UPSroom3 # config -s config.sdt.hosts.host4.device.type=ups # config -s config.sdt.hosts.host4.tcpports.tcpport1=22 # config -s config.sdt.hosts.host4.tcpports.tcpport1.loglevel=0 # config -s config.sdt.hosts.host4.udpports.udpport2=443 # config -s config.sdt.hosts.host4.udpports.udpport2.loglevel=0 The loglevel can have a value of 0 or 1. The default services that should be configured are: 22/tcp (ssh), 23/tcp (telnet), 80/tcp (http), 443/tcp (https), 1494/tcp (ica), 3389/tcp (rdp), 5900/tcp (vnc) Add Other Network Host To add any other type of network host with the following details: IP address / DNS name 192.168.3.10 Host name OfficePC Description MyPC Allowed services ssh port 22,https port 443 log level for services 1 Issue the commands below. If the host is not a PDU or UPS power device, or a server with IPMI power control, leave the device type blank: # config -s config.sdt.hosts.host4.address=192.168.3.10 # config -s config.sdt.hosts.host4.description=MyPC # config -s config.sdt.hosts.host4.name=OfficePC # config -s config.sdt.hosts.host4.device.type='' (leave this value blank) # config -s config.sdt.hosts.host4.tcpports.tcpport1=22 # config -s config.sdt.hosts.host4.tcpports.tcpport1.loglevel=1 # config -s config.sdt.hosts.host4.udpports.tcppport2=443 # config -s config.sdt.hosts.host4.udpports.tcpport2.loglevel=1 To add the new host as a managed device, make sure to use the current total number of managed devices + 1, for the new device number. To get the current number of managed devices: # config -g config.devices.total 222