Tripp Lite B0930042E4UV Owners Manual for B093- B097- and B098-Series Console - Page 94
Set Up Cellular CSD Dial-In
View all Tripp Lite B0930042E4UV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
5. Firewall, Failover and OOB Access 5.7.4 Set Up Cellular CSD Dial-In Once you have configured the carrier connection, the cellular modem can be configured to receive Circuit Switched Data (CSD) calls. Note: CSD is a legacy form of data transmission developed for the TDMA-based mobile phone systems like GSM. CSD uses a single radio time slot to deliver 9.6kb/s data transmission to the GSM Network and Switching Subsystem, where it could be connected through the equivalent of a normal modem to the Public Switched Telephone Network (PSTN) an allow direct calls to any dial-up service. CSD is provided selectively by carriers. As such, it is important you receive a Data Terminating number as part of the mobile service your carrier provides. This is the number that external modems will call to access the console server. • Select the Cellular Modem panel on the System: Dial menu. • Check Enable Dial-In and configure the Dial-In Settings. 94