Tripp Lite B097016 Owners Manual for B093- B097- and B098-Series Console Serve - Page 57
Power, Environment and Digital I/O
View all Tripp Lite B097016 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
4. Serial Port, Host, Device and User Configuration To edit an existing device and add a new connection: • Select Edit on the Serial & Network: Managed Devices and click Add Connection. • Select the connection type for the new connection (Serial, Network Host, UPS or RPC). Then select the specific connection from the presented list of configured unallocated hosts/ports/outlets. To add a new network-connected managed device: • The Administrator adds a new network-connected Managed Device using Add Host on the Serial & Network: Network Host menu. This automatically creates a corresponding new managed device (refer to 4.4 Network Hosts) • When adding a new network-connected RPC or UPS power device, you set up a Network Host, designate it as RPC or UPS, then go to RPC Connections (or UPS Connections) to configure the relevant connection. Again corresponding new Managed Device (with the same Name /Description as the RPC/UPS Host) is not created until this connection step is completed (refer to 8. Power, Environment and Digital I/O). Note: The outlet names on this newly created PDU are by default "Outlet 1" "Outlet 2". When connecting a particular managed device that draws power from the outlet, the outlet will take the name of the powered managed device. To add a new serially connected managed device: • Configure the serial port using the Serial & Network: Serial Port menu (refer to 4.1 Configure Serial Ports). • Select Serial & Network: Managed Devices and click Add Device. • Enter a Device Name and Description for the managed device. • Click Add Connection. Select Serial and the Port that connects to the managed device. • To add a UPS/RPC power connection, network connection or another serial connection, click Add Connection. • Click Apply. 57