Tripp Lite B098016 Owners Manual for B093- B097- and B098-Series Console Serve - Page 126
the Dial-In PPP Server.
View all Tripp Lite B098016 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
6. SSH Tunnels and SDT Connector The steps below show the establishment of an SSH tunneled connection to a network-connected device using the PuTTY client software. In the Session menu, enter the console server's IP address in the Host Name or IP address field. • For dial-in connections, this IP address will be the Local address you assigned to the console server when you set it up as the Dial-In PPP Server. • For Internet (or local/VPN connections) connections, this will be the public IP address of the console server. Select the SSH Protocol. The port will be set as 22. Go to the SSH: Tunnels menu. In Add new forwarded port, enter any frequently unused port number for the source port (e.g., 54321). Set the Destination: IP details. • If your destination device is network-connected to the console server using RDP, set the destination as :3389. If when setting up the Managed Device as Network Host on the console server, you specified its IP address to be 192.168.253.1 (or its DNS Name was accounts.myco.intranet.com), then specify the destination as 192.168.523.1:3389 (or accounts.myco.intranet.com:3389 ). Only devices that have been configured as networked hosts can be accessed using SSH tunneling (except by the "root" user who can tunnel to any IP address the console server can route to). 126