Tripp Lite B098016 Owners Manual for B093- B097- and B098-Series Console Serve - Page 73
IP Passthrough Configuration, 11.4 Service Intercepts, 11.5 IP Passthrough Status
View all Tripp Lite B098016 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
4. Serial Port, Host, Device and User Configuration 4.11.3 IP Passthrough Configuration To configure IP passthrough: • Click Serial & Network: IP Passthrough and check Enable. • Select the Modem to use for upstream connectivity. • Optionally, enter the MAC Address of downstream router's connected interface. Note: If the MAC address is not specified, the console server will pass through to the first downstream device requesting a DHCP address. • Select the Ethernet Interface to use for connectivity to the downstream router. • Click Apply. 4.11.4 Service Intercepts These allow the console server to continue to provide services for out-of-band management when in IP passthrough mode. Connections to the modem address on the specified intercept port(s) will be handled by the console server, rather than being passed through to the downstream router. • For the required service of HTTP, HTTPS or SSH, check Enable. • Optionally modify the Intercept Port to an alternate port (e.g. 8443 for HTTPS). This is useful if you want to continue to allow the downstream router to remain accessible via its regular port. 4.11.5 IP Passthrough Status Refresh the page to view the Status section. It displays the modem's External IP Address being passed through, the Internal MAC Address of the downstream router (only populated when the downstream router accepts the DHCP lease), and the overall running status of the IP passthrough service. Additionally, you may be alerted to the failover status of the downstream router by configuring a Routed Data Usage Check under Alerts & Logging: Auto-Response. 73