Tripp Lite PDUMV30NET Owner's Manual for Monitored/Switched Rack PDUs 933151 - Page 8

Features Input Plug Adapter (Select Models): Converts the PDU's twist-lock input plug to a straight-blade input plug. Power Inlet (Select Models): The IEC power inlet connects to the included power cord or a compatible user-supplied power cord. The inlet includes a bracket to secure the cord connection. IEC 309 3-Pole Input Plug: Available on select models. Outlets (Vary by Model): During normal operation, the outlets distribute AC power to connected equipment. Select models feature an LED that indicates outlet status. 2-Position IEC-60320-C13 NEMA 5-15/20R IEC-60320-C13 IEC-60320-C19 Outlet LEDs: On switched models, each outlet LED illuminates when the associated outlet is ready to distribute live AC power. LOAD (AMPS) LOAD (AMPS) .8.8 LOAD (AMPS) .8.8 LOAD (AMPS) E Bank1 Scroll D IP A C Select / Rotate E Bank2 30 Amp A Scroll IP / Rotate B 20 Amp Digital Load Meter (Ammeter): The total connected equipment load in amperes is displayed by the digital meter A . 20-amp models feature a Scroll IP/Rotate Switch B . Press this switch for one second to display the PDU's IP address (two characters at a time). Press for two seconds to rotate the LED display for ease of reading in vertical installations with the input cord at the top or bottom of the PDU. 30-amp models feature a Select/Rotate Switch C and a dedicated Scroll IP Switch D . Press the Select/Rotate Switch once to display the total load (in amps) on the PDU. Press again to display the load on Bank 1 of the PDU and again to display the load on Bank 2. The Load Bank LEDs E will indicate display status as follows. Both outlet bank LEDs illuminated: total PDU load displayed. Bank 1 or Bank 2 LED illuminated: load on corresponding load bank displayed. Press the Select/Rotate Switch for two seconds to rotate the LED display for ease of reading in vertical installations with the input cord at the top or bottom of the PDU. 8 201112142 933151.indb 8 1/24/2012 2:09:57 PM