Tripp Lite SRCOOL18K Owners Manual - Page 6

Installation (continued) 2-2 Align the cooling duct adapter with the cool air output A . Using a Phillips screwdriver, secure it to the unit with the screws used for securing the pre-installed louvered vent B . B B Note: The SRCOOL24K cooling duct adapter requires four additional screws (included). A A 2-3 Connect the flexible black cooling duct tube A to the cooling duct adapter B . Align the duct with the circular adapter opening, push the duct downward and turn the duct clockwise until it screws into the adapter solidly. 1 2 A 2-2 SRCOOL18K SRCOOL24K B B 1 2 A 2-3 2-4 Place the other end of the cooling duct near the air intake of the target device or rack enclosure, using the straightest, shortest path available (for SRCOOL24K, repeat with the second cooling duct). If you plan to cool a rack enclosure, place the end of the cooling duct over a perforated area near the top of the enclosure's front door (or near the top of the bank of equipment that requires cooling). Cool air will sink and spread across the air intakes at the front of the rack enclosure. 2-4 SRCOOL18K SRCOOL18K SRCOOL24K SRCOOL24K 6