Tripp Lite SU1500RTXLCD2U Owner's Manual for Single-Phase Online Rack UPS with - Page 26
Internal Battery Replacement
View all Tripp Lite SU1500RTXLCD2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Internal Battery Replacement Battery Replacement Door: Under normal conditions, the original battery in your UPS will last several years. Battery replacement should be performed only by qualified service personnel. Refer to "Battery Warnings" in the Safety section. If you require a replacement battery, you can find it at www.tripplite.com/support/battery/index.cfm. See the chart below to find the right replacement battery for your UPS system: UPS Model SU750RTXLCD2U SU1000RTXLCD2U SU1500RTXLCD2U SU2200RTXLCD2U SU3000RTXLCD3U Replacement Battery Cartridge RBC24V-LCD RBC24V-LCD RBC94-2U RBC94-2U RBC96-3U See the following diagrams for battery removal and installation procedures. 2U Models Note: The SU1500RTXLCD2U is shown, but the procedure is the same for all other 2U units. 1 Remove the 4 front screws from the front panel and remove. Unplug the LCD connectors to remove it completely. 1 2 Flip open the white connector holder. Disconnect the connector that's inside the white connector holder. 2 3 Remove the two screws that hold the metal bar in place (behind the front panel on the right side). Slide the metal bar to the left and remove it from the UPS. 3 26 12-488-93-3156.indb 26 9/12/2012 3:57:14 PM