Tripp Lite SV20KM1P1B Owners Manual for WEBCARDLX English - Page 6

Installation 3 - Static IP Address Assignment/Terminal Menu Configuration Settings 3-1 Determine IP Information: The WEBCARDLX and WEBCARDLXMINI can support a single static IPv4 address (requires setting the IP address, subnet mask and gateway) and/or a single static IPv6 address. In addition, the WEBCARDLX and WEBCARDLXMINI can support a single static IPv4 or an IPv6 DNS address that is required to be entered. 3-2 Configure Terminal Emulation Program: If you have not already done so, download the serial over USB driver (TL-cdc) from the Tripp Lite website. The driver can be found by going to www.tripplite.com/support and typing WEBCARDLX in the search field. To install the driver, follow the instructions provided. Once the driver is installed and a COM port has been assigned, set your terminal emulation program to use the COM port that corresponds to the USB port. 3-3 Connect WEBCARDLX / WEBCARDLXMINI to Computer: Connect your PC to the Micro-USB port on the WEBCARDLX or WEBCARDLXMINI using the cable provided. 6