Troy-Bilt Pro-Line CRT Operation Manual - Page 10

Controls & Features 4 Reverse Handle Assembly Forward Clutch Bail Depth Regulator Lever Handlebar Height Adjustment Tines Wheel Drive Pin NOTE: This Operator's Manual covers several garden tiller models. The tiller depicted may differ from yours. Engine Controls Figure 4-1 Reverse Handle Assembly (if so equipped) The reverse handle assembly controls the engagement of the reverse drive of the wheels and tines. For detailed information on all engine controls refer to the separate Engine Operator's Manual. Wheel Drive Pins Each wheel is equipped with a wheel drive click pin that secures the wheel to the wheel shaft. The wheels can be positioned in either a wheel drive or a freewheel mode. Depth Regulator Lever This lever controls the tilling depth of the tines. Pull the lever back and slide it up or down to engage the notched height settings. TRANSPORT 1" 3" 5" 7" Forward Clutch Bail The forward clutch bail controls the engagement of the forward drive of the wheels and tines. Handlebar Height Adjustment The handlebar height is adjustable to three different settings. In general, adjust the handlebars so they are at waist level when the tines are 3-4" in the ground. 10