Troy-Bilt Pro-Line FRT Operation Manual - Page 22
Service
View all Troy-Bilt Pro-Line FRT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Service 7 Belt Replacement 4. Forward Clutch Belt 1. Stop the engine, allow it to cool and disconnect the spark plug wire before working near the belts. Also remove the ignition key on electric start models. 2. Remove the two nuts and remove the belt cover. Refer to Fig. 6-8 in the Maintenance & Adjustments Section. 3. Move the reverse clutch belt out of the way. You do not need to completely remove the belt. Press the reverse idler pulley inward for slack and then slip the bottom half of the belt completely off the transmission pulley. Pull the bottom half of the belt out of the housing and let it hang off the outside of the tiller. See Fig. 7-1. Disconnect the forward clutch cable from the forward clutch idler arm bracket . See Fig. 7-2. Note the hole from which you disconnect the cable. It is important that you reconnect the cable to the same hole. Forward Clutch Idler Arm Transmission Pulley Figure 7-1 Forward Clutch Cable Connection Reverse Clutch Belt Figure 7-2 5. Slide the belt off the engine pulley, away from the engine, out from under the belt guide and completely off the pulley. See. Fig. 7-3. Engine Pulley Belt Guide Forward Clutch Belt Figure 7-3 22