Troy-Bilt TB554 Operation Manual - Page 9
Controls and Features - edger
View all Troy-Bilt TB554 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Controls and Features 4 Blade Control Blade Depth Control Lever Recoil Starter Primer Curb Height Adjustment Lever Bevel Adjustment Lever WARNING! Be familiar with all the controls and their proper operation. Know how to stop the machine and disengage it quickly. NOTE: For detailed information on all engine controls, refer to the separate Engine Operator's Manual. Recoil Starter The recoil starter is used to start the engine. Primer The primer is used to pump gas into the carburetor and aid in starting the engine. Use it to start a cold engine, but do not use it to restart a warm engine after a short shutdown. Curb Height Adjustment Lever The curb height adjustment lever is found on the rear portion of the edger. When placed in an applicable notch, it aids in stabilizing the edger while edging grass along a curb. Blade Control Located on the upper handle, the blade control must be depressed against the upper handle in order to operate the edger. Releasing the blade control stops the engine and the edger blade. Blade Depth Control Lever The blade depth control lever is located on the right side of the upper handle. It is used to control the depth of the cut. The further forward the blade depth control lever is moved, the deeper into the soil the edger blade will cut. Bevel Adjustment Lever The bevel adjustment lever is located on the front, left portion of the edger, behind the edger blade. It is used to vary the angle of the edger blade between one of three positions for edging/ trenching or beveled edging. 9