Turtle Beach Ear Force DP11 User's Guide - Page 5

PS3™ Setup 1. Connect the digital optical cable (included) from the digital output on your PS3 to the digital input on the DSS2. (NOTE: Remove the protective caps from each end of the optical cable before inserting into the sockets.) 2. Connect the DSS2 USB power cable from the power socket on the rear of the DSS2 to a free USB port on your PS3. 3. Slide the DSS2 power switch to the ON position. The Power LED on the DSS2 will turn ON. 4. Insert the green 3.5mm connector from the headset to the Headphone Output Jack on the front of the DSS2. Then insert the USB connector from the headset to the USB Output on the DSS2. 5. Adjust the Volume Control knob to adjust the overall volume level of the Headset Output. 4 5 3 2 1 Optical Cable (included) USB Cable (included) OR Console A/V cable or HDMI Cable PS3 GAME ON MIC MUTE CHAT Configure PS3 System Settings 0 12/14 12:15 PM Audio Output Settings On Sets to output audio through multiple connectsor simultaneously. Audio output to connectors thatrae not selected in [Audio Output Settings] is downscadle to 2 Ch. 1. Settings > Sound Settings > Audio Output Settings > Optical Digital > Dolby Digital 5.1 Ch. Audio Device Settings Microphone Level 3 Turtle Beach P11 Output Device Turtle Beach P11 OK X Enter Back Options 2. Settings > Sound Settings > Audio Multi-Output. 3. Settings > Accessory Settings > Audio Device Settings > Input/Output Device > Turtle Beach P11. 4. Adjust microphone level. 5 6