Turtle Beach Ear Force PX5 User Manual - Page 32

Troubleshooting Tips con't, Safety Notice

Page 32 highlights

Troubleshooting Tips (con't) PS3 Pairing Issues • If the PS3 cannot locate your PX5, make sure that it is in pairing mode before you starting scanning, as indicated by the flashing red/blue LED. • If the PX5 is missing from the device menu list after you re-start your PS3, please repeat the pairing process. • If the PX5 appears on the PS3 Audio Device menu but is not selectable, then it is not connected (it should connect automatically when the Audio Device menu is selected). Make sure the headset is charged and powered on, then select the "Connect Bluetooth" tab on the screen. If this doesn't correct the issue, please repeat the pairing process. • If there are other active Bluetooth devices nearby, power them off to see if this has any effect on the PX5's performance. • Also try updating your PS3's system software with the latest version. This can be done in the System Settings menu. Voice Chat Drops • Most in-game voice chat drops are simply caused by network performance or "lag". Usually they subside after a few moments so please be patient. In extreme cases, you may have to leave a game and return to reset the chat function. • If you use a wireless internet connection, low signal strength from your modem/router can make the voice chat malfunction. A wired connection from your modem/router to your console is recommended for best results. • If there are other active Bluetooth devices nearby, power them off to see if this has any effect on the PX5's performance. Safety Notice To avoid potential damage to the device, always disconnect all cables before transporting it. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time, so it is important to keep the volume at a safe level. Over time, your ears adapt to loud volume levels, so a level that may not cause initial discomfort can still damage your hearing. If you experience ringing in your ears after listening with the headset, it means the volume is set too loud. The louder the volume is set, the less time it takes to affect your hearing. So, please take care to listen at moderate levels. • Before placing a headset on your ears, turn the volume down completely, then slowly increase it to a comfortable level. • Turn down the volume if you can't hear people speaking near you. • Avoid turning up the volume to block out noisy surroundings. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

29
PS3 Pairing Issues
• If the PS3 cannot locate your PX5, make sure that it is in pairing mode before you starting scanning, as indicated by the
flashing red/blue LED.
• If the PX5 is missing from the device menu list after you re-start your PS3, please repeat the pairing process.
If the PX5 appears on the PS3 Audio Device menu but is not selectable, then it is not connected (it should connect automatically when
the Audio Device menu is selected).
Make sure the headset is charged and powered on, then select the “Connect Bluetooth” tab on
the screen.
If this doesn’t correct the issue, please repeat the pairing process.
If there are other active Bluetooth devices nearby, power them off to see if this has any effect on the PX5’s performance.
• Also try updating your PS3’s system software with the latest version. This can be done in the System Settings menu.
Voice Chat Drops
• Most in-game voice chat drops are simply caused by network performance or “lag”.
Usually they subside after a few moments so
please be patient.
In extreme cases, you may have to leave a game and return to reset the chat function.
• If you use a wireless internet connection, low signal strength from your modem/router can make the voice chat malfunction.
A wired connection from your modem/router to your console is recommended for best results.
• If there are other active Bluetooth devices nearby, power them off to see if this has any effect on the PX5’s performance.
To avoid potential damage to the device, always disconnect all cables before transporting it.
WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time, so it is important
to keep the volume at a safe level. Over time, your ears adapt to loud volume levels, so a level that may not cause initial discomfort can
still damage your hearing. If you experience ringing in your ears after listening with the headset, it means the volume is set too loud.
The louder the volume is set, the less time it takes to affect your hearing. So, please take care to listen at moderate levels.
• Before placing a headset on your ears, turn the volume down completely,
then slowly increase it to a comfortable level.
• Turn down the volume if you can’t hear people speaking near you.
• Avoid turning up the volume to block out noisy surroundings.
Troubleshooting Tips (con’t)
Safety Notice