Turtle Beach Ear Force XP400 User's Guide - Page 6

Xbox 360® and PS3™ Setup Xbox 360 (Slim) and PS3 1. Connect the Digital Optical Cable NOTE: Remove the protective caps from each end of the optical cable before inserting it into the sockets. 2. Connect the Transmitter Power XBOX 360 (Older Models)* 1. Connect the Digital Optical Cable* (Requires XBOX 360 HDMI Audio Adapter, sold separately) NOTE: Remove the protective caps from each end of the optical cable before inserting it into the sockets. 2. Connect the Transmitter Power Digital Optical Cable (included) DIGITAL OUT 1 CONSOLE Digital Optical Cable (included) Xbox 360 Audio Adapter Cable* (sold separately) 1 Transmitter USB Cable 2 7 Transmitter USB Cable 2 *Older Xbox 360 console models do not include an optical output so an Xbox 360 HDMI Audio Adapter cable is required (sold separately). If your HDTV has an optical AUDIO OUT jack, you can use it to connect the optical cable to the transmitter. Xbox 360 Wireless Chat Setup Connecting the XBA Bluetooth® Chat Adapter* 1. Power on the Xbox 360 controller and plug the XBA into the controller headset jack. 2. With the XBA powered-OFF, press and hold the button on the XBA for 4 seconds to enter Bluetooth pairing mode. The LED will begin to blink rapidly. 3. With the XP400 powered-ON, press and hold the Bluetooth button (BT MFB) on the right ear cup for about 5 seconds to power on the Bluetooth. If this the first time you've powered-on the headset, the Bluetooth will automatically be in pairing mode. If its not the first time the headset has been powered-ON, make sure the Bluetooth is powered-off and press and hold the BT MFB button for about 5 seconds until you hear 3 fast beeps in the headset and the Bluetooth LED is flashing blue and red. After a few seconds, the XBA and the XP400 will be paired. The XBA will automatically pair itself to the headset each time it's powered on so you will only need to complete the pairing process during initial setup. XBA Functions Function Power ON Power OFF Mic MUTE Mic UNMUTE Pairing Mode (paired) (not paired) Button Press Single Hold 3 secs Double Double Hold 4 secs LED 1 blink / sec OFF Solid ON 1 blink / sec 2 blinks / sec 1 blink / sec XBA LED XBA Button *The XBA adapter is not compatible with the Xbox 360 chat pad and may not be compatible with third party controllers. 8