Turtle Beach Ear Force XP400 User's Guide - Page 7

Xbox 360® Wired Chat Setup* (optional) In cases where the XBA Bluetooth Chat Adapter cannot be used, such as with third-party controllers and the Xbox Chat Pad, an optional talkback cable is available for a wired chat connection between the headset and controller. 1. Insert the right angle plug into the headphone jack on the Xbox 360 controller. Xbox 360 Controller 2. Insert straight plug into the controller jack on the left ear cup of the headset. *The Xbox 360 Talkback Cable is required for this setup and is sold separately at www.TurtleBeach.com. Xbox 360 Talkback Cable* (sold separately) Xbox 360 Input Configure Xbox 360 System Settings 1. In the Xbox 360 System Settings, select: Settings > Audio > Accessory Settings > Audio Device Settings Set the "Digital Output" to "Dolby Digital 5.1" Digital Output Digital Stereo Current Setting Dolby Digital Dolby Digital 5.1 Dolby Digital 5.1 with WMA Pro Choose the digital output type for your system. This setting only applies to optical digital and HDMI audio outputs. Select Back 2. In the Xbox 360 System Settings, select: Settings > Preferences > Voice Set the "Voice/Game Volume" to 10 and set the "Voice Output" to "Play Through Headset" Voice Voice Volume 10 Game Volume 10 Mute Kinect Voice Output Play Through Headset Play Through Speakers Voice Output 9 PS3™ Chat Setup When using the XP400 with a PS3, the Bluetooth® is used for Playstation® Network (PSN™ ) chat. Follow these instructions to pair the Bluetooth with your PS3 console. 0 12/14 12:15 PM Register to manage Bluetooth® devices such as headsets, keyboards and mouse devices. 1. With the XP400 Bluetooth powered OFF, go in the PS3 Menu and select "Settings" > "Accessory Settings" > "Manage Bluetooth Devices" 2. If you have never used a Bluetooth device or have deleted any profiles from other devices previously used with your console, the PS3 prompt will ask if you wish to register a device. Choose "Yes" to start scanning. If any other Bluetooth devices have previously been paired with your console they will appear in a list. Choose "Start Scanning" at the bottom of the screen. 3. On the XP400 headset, press and hold the BT MFB for 5 seconds until the starts flashing blue and red and you hear 3 fast beeps - then release the button. 4. When the PS3 is finished scanning, it will prompt you to select the Bluetooth device. Select "TURTLE BEACH BLUETOOTH CHAT" from the list. 5. Enter "0000" as the Pass Key and select "OK". The Bluetooth LED on the headset will flash blue about once per second, indicating that the Bluetooth has paired to your PS3. Configure PS3 System Settings Audio Device Settings Microphone Level 3 Input Device Turtle Beach Bluetooth Chat Output Device Turtle Beach Bluetooth Chat OK X Enter Back 1. In the PS3 Menu, select "Settings" > "Sound Settings" > "Audio Output Settings" > Optical Digital > Dolby Digital 5.1 2. In the PS3 Menu, select "Settings" > "Accessory Settings" > "Audio Device Settings" > set the "Input" and "Output" to "TURTLE BEACH BLUETOOTH CHAT" 10