URC TRF-ZW1 Owners Manual - Page 4

TRF-ZW1 EXTENDER TRF-ZW1 Top Panel Descriptions Power LED: Illuminates to indicate the TRF-ZW1 is powered. Ready: Illuminates to indicate it is ready to receive data. Network: Illuminates to indicate communication to the home network. Error: Please consult the troubleshooting section of the URC MIOS documentation site. http://urc-docs.mios.com/doc.php Battery button: This button is used to enter battery pairing mode while pairing devices in various locations. 1. Disconnect the TRF-ZW1 from the network and power cable. 2. Insert 4 AA batteries into the bottom of the unit. 3. Press and Hold the "Battery" icon on the top of the unit for 5 seconds. ● The Power light will start to flash Blue for 30 seconds. ● After 10 more seconds the ready light will start to flash amber. By default the unit goes into Pairing (Include) mode automatically. + (pairing button): Stated above the TRF-ZW1 defaults to Pairing (Include) when battery power is activated. 1. The Ready light will slowly flash to show it is ready to pair a device. 2. Go to the device you wish to pair and perform its instructed pairing method. 3. The ready light will quickly start flashing for 2 seconds to verify the device has been paired. 4. You can continue to pair devices while in pairing mode. 5. When you are done pairing (including) devices press the [+] button to save. ● The Ready light will not flash for a moment while saving. 6. To turn off Battery mode press and hold the [+] button for 5 seconds. 2