URC TRF-ZW1 Owners Manual - Page 5

TRF-ZW1 EXTENDER 7. Connect the TRF-ZW1 back to the network and power cables then login to the TRF-ZW1 programming software. You will find the items add to the "No Rooms" section. - (un-pairing button): After the TRF-ZW1's battery mode is activated and the ready light is flashing for pairing (include) you will press the [-] on the unit. When the [-] button is pressed the ready light will flash slightly faster in un-pairing (exclude) mode, then in pairing (include) mode). 1. Go to the device you wish to un-pair (exclude) from the system and perform the devices instructed in the un-pairing method. 2. The Ready light will quickly flash for 2 seconds to verify the item has been un-paired (excluded). 3. When you are done un-pairing devices press the [-] to save the changes. ● The Ready light will pause from flashing for a moment to confirm. 4. To turn off battery mode press and hold the [+] for 5 seconds. 5. Connect the TRF-ZW1 back to the network and power cables then login to the TRF-ZW1 programming software. You will find the items removed are no longer in the program. Reset button: WARNING!!! Pressing this button will set the unit back to factory settings. Press and hold the recessed button adjacent to the (-) unpair button for 10 seconds until the lights turn off. 3