Uniden 1060-2 English Owners Manual - Page 14

During a call: 1 Press . The handsfree. symbol is displayed while 2 Press or again to go back to the normal talk operation. End a call 1 Press . Or Place the handset back on the base/charger. The call time will remain in the display for a further 5 seconds. Call Waiting If you subscribe to Call Waiting and the call waiting tone sounds during a call, press to switch between callers. This model has a special call waiting tone in addition to the one you typically hear from your local service provider. This tone will be heard after the standard tone when you receive a call waiting notification. This tone is provided as an extra feature and will have to be turned on in order to activate as the default setting is set to OFF. To turn this feature on, go to the menu, select audio setting, tones, and call waiting - then set the feature to ON. Receive a call When you receive a call, the handset(s) will ring (as long as handset ring volume is not set to OFF - see page 20). The symbol will flash in the handset display. If you have subscribed to a Caller ID service, the caller's number will be displayed (if available). See page 32 for further information on Caller ID. 1 Press to answer the call. Or simply lift the handset from the base (providing Auto Talk is set to On, see page 21). After a short delay the call timer will start timing the call. NOTE: If this feature is set to OFF, you WILL still receive call waiting notifications IF you have subscribed to call waiting features from your local service provider. Receiving internal calls If you receive a call from another handset, the internal caller's handset number and banner name, if programmed, will be displayed. Muting the ringer You can also turn the ringer off or mute temporarily, by pressing and holding the phone rings. while [13]