Uniden A1-R7 English Owner Manual 1 - Page 12
Install And Turn On R7
View all Uniden A1-R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
OLED EXAMPLES Time Display Batt 12.0 v Highway AM 12 : 55 MEANING Information displayed: • Voltage • Time and AM/PM • Highway/City/Advanced Quiet Ride Speed 20 mph Dark Mode K Q-Ride 24.051 GHz Information displayed: • Current speed in mph/km/h • Signal strength indicators (single indicator shown) • Status Area (Q-Ride displays) Set mode to Dark if the unit's OLED is not anticipated to change a lot to prevent image burn-in (Auto Dim setting). In Dark mode, the OLED is dark with a single white dot in the lower corner that moves from bottom left to center to bottom right. The movement of the dot confirms that the unit is still powered up. INSTALL AND TURN ON R7 You can mount the R7 on the windshield (1- and 2-cup suction brackets included) or on the dashboard (hook and loop tape included). INSTALL/POWER ON Windshield When you mount the R7 on the windshield, mount it in the middle of the windshield between the driver and passenger. Be sure there are no obstructions and that there is a clear view through the windshield. 1. Attach the rubber suction cups to the bracket and push the cups firmly onto the windshield. 2. Slide the unit onto the bracket until it clicks into place. 3. Plug the power cord RJ11 connector into the R7 and plug the cigarette lighter adapter into the vehicle's cigarette lighter. 4. When the vehicle turns on, the R7 automatically turns on and runs through a self test cycle. Release the R7 from the bracket by pressing the Eject key on top of the detector. - 12 -