Uniden A1-R7 English Owner Manual 1 - Page 18
Auto Mute = ON mode.
![]() |
View all Uniden A1-R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
MENU ITEM Left Display (GPS on) Alert Display Speed Unit (GPS on) X Band Tone K Band Tone MRCD Tone Ka Band Tone Bogey Tone Laser Tone Auto Mute Auto Mute Volume FUNCTION SETTINGS Lets you select various attributes to display on the left side of the OLED. Speed (Default) Spd + Compass Compass Voltage Altitude (m or ft) Altitude display depends on speed unit selection (see page 27). Select one of two OLED display Alert Display #1 (Default) formats (see page 26). Alert Display #2 Select the speed measurement mph (Default) type. km/h Set a tone to indicate X Band. 1 ~ 12 tones (Default = 1) Set a tone to indicate K Band. 1 ~ 12 tones (Default = 2) Set a tone to indicate MRCD. 1 ~ 12 tones (Default = 2) Set a tone to indicate Ka Band. 1 ~ 12 tones (Default = 3) Set a tone to indicate the detector is responding to a different Ka band signal. 1 ~ 5 tones (Default = 1) Set a tone to indicate Laser. 1 ~ 12 tones (Default = 4) Auto Mute reduces alarm level to 1 after 3 seconds and returns to normal operation (Auto Mute = OFF) 10 seconds after the alert ends. If the same alarm sounds within the 10 second period, Auto Mute remains at level 1. The unit returns to normal operation (Auto Mute = OFF) if a different band is detected during Auto Mute = ON mode. On (Default) Off Sets a volume level for muted alarms. 0 - 5 (Default = 2) Off - 18 -
![](/manual_guide/products/uniden-a1r7-english-owner-manual-cfcbefa/18.png)