Uniden A1-R7 English Owner Manual 1 - Page 13

Menu System

Page 13 highlights

Dashboard The same types of mounting requirements for the windshield apply for mounting the unit on the dashboard. 1. Attach the unit to the dashboard using the hook and loop fastener tape. Be careful not to cover any air vent holes with the hook and fastener tape. 2. Plug the power cord RJ11 connector into the R7 and plug the cigarette lighter adapter into the vehicle's cigarette lighter. 3. When the vehicle turns on, the R7 automatically turns on and runs through a self test cycle. Pull the unit from the dashboard, separating the hook and loop tape. MENU SYSTEM Menus let you set up the system to your own requirements. You can turn different bands on and off and set specific items such as speed or auto mute. Press MENU to access the Menu system. The screen displays the selection's current status. For example, if you press MENU and the screen displays Voice: ON, you have the option of turning Voice to OFF. Use the following keys to navigate the menus: • MENU: Change a menu item setting (press and hold to exit the Menu system). • VOL + : Go to the next Menu item. • VOL - : Go to the previous Menu item. Several menu items only display if GPS is set to ON. These entries are noted in the following table. - 13 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

- 13 -
Dashboard
The same types of mounting requirements for the windshield apply for mounting the
unit on the dashboard.
1.
Attach the unit to the dashboard using the hook and loop fastener tape.
Be careful not to cover any air vent holes with the hook and fastener tape.
2.
Plug the power cord RJ11 connector into the R7 and plug the cigarette lighter
adapter into the vehicle’s cigarette lighter.
3.
When the vehicle turns on, the R7 automatically turns on and runs through a
self test cycle.
Pull the unit from the dashboard, separating the hook and loop tape.
MENU SYSTEM
Menus let you set up the system to your own requirements. You can turn different
bands on and off and set specific items such as speed or auto mute.
Press
MENU
to access the Menu system. The screen displays the selection’s current
status. For example, if you press
MENU
and the screen displays
Voice: ON
, you have
the option of turning
Voice to OFF.
Use the following keys to navigate the menus:
MENU
: Change a menu item setting (press and hold to exit the Menu system).
VOL +
: Go to the next Menu item.
VOL –
: Go to the previous Menu item.
Several menu items only display if GPS is set to ON. These entries are noted in the
following table.