Uniden ATLANTIS 275 English Owners Manual - Page 17

Using the radio in scan mode xx To activate scan mode, press SCN DUAL. xx You must have at least two channels in memory to start a scan. xx You cannot transmit while in scan mode. xx To save a channel into memory, select the channel, then press the MEM SOS key. The MEM icon displays whenever you tune to that channel. xx To remove a channel from memory, set the radio to that channel, then press the MEM SOS key. The MEM icon no longer displays. xx When the radio stays on a channel, press ▲ to leave that channel and resume scanning. xx Pressing 16/9 TRI while in Scan mode pauses scanning and immediately goes to emergency channel 16. Press again to go to channel 9. Press a third time to resume scanning. xx To end the scan, press the SCN DUAL key again; the radio remains on the last scanned channel. ## Note: WX channels and Channel 70 cannot be saved in memory. Scan mode with Weather Alert Watch If you activate Weather Alert Watch while in scan mode, the radio checks the most recently-used weather channel every seven seconds, then continues scanning the next channel in memory: Memory Channel Scan 08 10 11 12 13 14 15 17 20 24 25 Every few seconds, the radio checks the last-used weather channel, then scans the next channel. WX Alert Watch on wx Uniden Atlantis 275 Radio Owner's Manual E-11