Uniden BCT8 English Owners Manual - Page 25
Private Bank Scanning - programming error
UPC - 050633650349
View all Uniden BCT8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Private Bank Scanning Programming Frequencies into Channels Before the scanner begins Private Bank scanning, you must program a frequency into at least one channel. Program frequencies you purchased from your dealer, from various free and FCC-based sources on the internet, or from the Frequency guide included in BCT8 package. You will need to program each frequency into the scanner's channels in order to hear these frequencies. 1. While Private Bank scanning is activated, press HOLD/RESUME and enter the channel number where you want to store a frequency by using the keypad, then press HOLD/RESUME. Change the channel by using the or key. 2. Enter the frequency you want to store by using the keypad and . (decimal key). 3. Press E to store the frequency into the channel. 4. If you want to program another frequencies into the channel, select another channel by using the or key. Note: • To clear a mistake while entering the frequency, press . (decimal key) repeatedly until the display is cleared. • If you enter a invalid frequency, an error tone will sound and appears on the display. To clear the Error message immediately, press . (decimal key). • Even if you don't enter full numbers as a frequency number, the scanner will automatically select the nearest valid frequency. Deleting a Stored Frequency To delete a stored frequency: a. Select a channel. b. Press 0. c. Then press E. Note: Channels with no frequencies are automatically locked out. 21