Uniden CEZAI2998 English Owners Manual - Page 31

your DSL service might have left some filters for you; if not, call your DSL provider or look in any electronics store. Plug the DSL filter into the telephone wall jack and then plug your phone's base into the filter. Make a test call to make sure the noise is gone. Resetting and Registering Handsets If you are having trouble with a cordless handset or if you want to replace one, you need to clear the registration information from the base and the handset: Do you have the base the handset is registered to? Yes No 1. Press and hold Flash/exit and Pound 1. Press and hold Flash/exit and (#) until the System Reset menu Pound (#) until the System Reset appears (about 5 seconds). menu appears (about 5 seconds). 2. Select Deregister HS. The display 2. Select Base Unavailable. lists all registered handsets. 3. When the phone asks you to 3. Select the handset you want to reset. confirm, select Yes. The handset 4. When the phone asks you to confirm, deletes its own link without select Yes. The handset clears its contacting the base. information from the base and deletes it own link to the base. When you reset a handset (or if you purchase a new one), that handset displays a Handset Not Registered message. If you see this message on a handset, you need to register it to a base before you can use it. Registering a handset ) On the base, open the menu and select Register Handset. The display should say Handset Registering. ) On the handset you want to register, press and hold Pound (#) until the handset display says Handset Registering (about 2 seconds). ) In about 30 seconds, the handset display should say Registration Complete. Press Talk and make sure you get a dial tone. If... Try... - you don't hear a dial tone Making sure the handset is fully - the display says Registration Failed charged, then start over at step 1. To register a handset to a different base, see the section "Expanding Your Phone" in the user's guide for the other base. 29